Manufacturer Of Inert Porcelain Balls - Alumina Ceramic Filler High Alumina Inert Ball/99% alumina ceramic ball – AoGe

Short Description:

Product Detail

Product Tags

Feedback (2)

With our superb management, potent technical capability and strict quality command procedure, we go on to provide our shoppers with trustworthy high-quality, reasonable costs and outstanding services. We goal at becoming considered one of your most trustworthy partners and earning your pleasure for Commercial Water Purifier Machine, Activated Alumina For Air Drying, Ethanol Drying, We sincerely welcome domestic and overseas retailers who phone calls, letters asking, or to vegetation to negotiate, we will present you good quality goods as well as the most enthusiastic assistance,We glance forward in your check out and your cooperation.

Manufacturer Of Inert Porcelain Balls - Alumina Ceramic Filler High Alumina Inert Ball/99% alumina ceramic ball – AoGe Detail:

Physical And Chemical Properties Of Inert Ceramic Balls

Physical and chemical properties of inert ceramic balls
Element	Al₂O₃ ％	60	70	80	90	95	99
	Fe₂O₃ ％	≤0.9	≤0.8	≤0.6	≤0.4	≤0.3	≤0.1
	The remaining components can be determined through negotiation between the supplier and the buyer when necessary.
water absorption，％		3±1，It can also be determined by negotiation between the supplier and the buyer
proportion，kg/m³		2.5-3.0	2.7-3.2	2.9-3.2	≥3.1	≥3.2	≥3.4
Bulk density，kg/m³		1400-1550	1400-1650	1500-1800	1700-1950	1800-1950	≥1900
Dust, crack or break		A single bag is less than 5%
Size deviation		Uniform sphere, the ratio of the largest to smallest diameter of a ceramic sphere does not exceed 1.2
Dimensional tolerance	≤10mm	±1.0
	11—25mm	±1.5
	26—50mm	±2.0
	≥50mm	±3.0
Free fall strength		Lossless rate ≥99％
Compressive strength	φ3	≥250	≥300	≥350	≥400	≥500	≥500
	φ6	≥800	≥1000	≥1000	≥1200	≥1500	≥1500
	φ8	≥1500	≥1600	≥1800	≥2000	≥2500	≥2500
	φ10	≥2000	≥2500	≥2800	≥3000	≥3500	≥3500
	φ13	≥3000	≥3000	≥3500	≥4000	≥5000	≥5000
	φ16	≥3500	≥4000	≥4500	≥5000	≥6000	≥7000
	φ20	≥6000	≥6000	≥7000	≥8000	≥10000	≥12000
	φ25	≥7000	≥7000	≥8000	≥10000	≥15000	≥17000
	φ30	≥8000	≥9000	≥10000	≥12000	≥17000	≥19000
	φ38	≥10000	≥12000	≥13000	≥15000	≥20000	≥22000
	φ50	≥12000	≥14000	≥16000	≥18000	≥22000	≥26000
	φ75	≥16000	≥18000	≥20000	≥22000	≥25000	≥30000
		50-75	55-75	60-80	≥80	≥82	≥85
Wear rate %		≤2			≤1
acid solubility，％		≤6
Alkalinity，％		≥77	≥85	≥90	≥92	≥95	≥97
Refractoriness，℃		≥400	≥500	≥700	≥1000	≥1000	≥1000
Resistant to sudden pressure difference		Non-destructive rate ≥ 99%, no change in compressive strength and pressure after sudden change is less than 25%
Resistant to sudden temperature changes		Lossless rate≥99%
Package	Iron drum packaging	Packed in iron drums, sealed with thick PP or PE plastic bags
Package	Woven bag packaging	Available in sturdy and UV-resistant woven bags
Note: Bulk density data is for reference only, not as a basis for acceptance.

Another Note: See Table 5 For The Water Absorption Of 99 Filler Balls

99 Filling Ball Water Absorption
99 filler	diameter	diameter
roll forming	φ＜25mm	＜5％
Machine press forming	φ＞25mm	＜10％

99.5% Technical Indicators

Al₂O₃	≥99%
SiO₂	≤0.14%
Fe₂O₃	≤0.04%
CaO +MgO	≤0.03%
TiO₂	≤0.06%
Na₂O	≤0.1%
K₂O	≤0.1%

Physical Index Of Chemical Filler Ball

CONDITION	INDEX
load softening (yb/t370-1995)	Deformation under 0.2mpa pressure is less than 0.6%
Thermal shock resistance (yb/t376.2-1995)	1200°C down to 600°C. 10 times without surface cracks
Reburn line changes (gb/t3997.1-1998)	1400 ℃ for 12 hours, the maximum value is 0.25%, the average value is less than 0.20%
Bulk density (gb/t2997-2000)	3.2-3.50 g/cm³
crushing strength	Meet more than 230 kg/cm2
Apparent porosity	12-18%
Bulk density	2.1-2.3g/cm³

Chemical Packing Ball Packing

1)Ordinary packing: polyethylene woven bag with net weight of 25kg, plus pallet

2)Steel drum packaging: 100L steel drum packaging, pallets can be added

Product detail pictures:

Related Product Guide:

We're proud from the higher client fulfillment and wide acceptance due to our persistent pursuit of high quality both on product and service for Manufacturer Of Inert Porcelain Balls - Alumina Ceramic Filler High Alumina Inert Ball/99% alumina ceramic ball – AoGe , The product will supply to all over the world, such as: UAE, Pakistan, Mombasa, The working experience in the field has helped us forged a strong relations with customers and partners both in domestic and international market. For years, our products have been exported to more than 15 countries in the world and have been widely used by customers.

Aluminum Oxide Ceramic Balls

Ball

Blank Filler

Ceramic Ball

We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.